插头引线弯折试验机 360度线材弯折试验机 360°摇摆测试机...

东菱检测仪

DL-7802B、C插头引线弯折试验机

DL-7802B、C  插头引线弯折试验机
PLUG BENDING TESTER
UL817、CSA22.2、IEC884-1、CCC、GB2099.1、VDE、SAA、JIS

本机专门测试AC / DC插头引出线及电线之耐折强度。试是将试样固定在夹具上加一定荷重及弯曲一定次数后检视其断线率。
This tester is specialized in testing the flexing endurance between power cord and blades，and is capable of testing the flexibility resistance of the cord itself。Samples are to be secured in the jaws of the flexing apparatus，and cord is to hang vertically with the weight tied on the lower end of it。The rotating jaws are to be adjusted to rotate to the angle of 90 degree to each side of the centered position。After a certain cycles is reached or until specimen is broken，detect the breakage ratio or calcuate the total cycles。This machine is able to auto-count and auto-stop during specimen broken。

试料数量Specimen Volume	1组（或6组）
摆动角度Flexing angles	左右各180º（或任意角度）连续设定，两方向可以不对   称，数字键盘设定数值，精度：0.1度
摆动速度Flexing speed	10 ~ 60c.p.m可调节，数字键盘设定
自动计数器Auto - counter	1~999999次，可预置
荷重Load	50g、100g、200g、300g、500g各1个
控制系统Control	伺服系统
负载电压Load Voltage	0 ~ 280V连续可调
负载电流Load Current	0 ~ 30A连续可调
其它功能Other function	所有数据为16 x 2 LCD（带背光源）数字显示，具有断线   停机，数据保持功能及密码功能，防止随意调节。
电源          Power	AC220V / 50Hz